川西坳陷东坡沙溪庙组气藏成藏演化模式   总被引：1，自引：0，他引：1  

徐敏  刘建  林小云  熊山  牛斌莉 《现代地质》2018,32(5):953

川西坳陷东坡气藏主力产层为沙溪庙组,其圈闭类型以构造-岩性圈闭为主,多为致密砂岩储层,但断层发育,有效改善了储层物性,断砂匹配样式与构造演化对油气成藏过程有重要影响。基于前人已有的认识,通过沙溪庙组气藏成藏动力演化、气水分布特征及生烃期次分析,结合构造演化、成藏幕次等研究,认为沙溪庙组天然气成藏受构造古隆起、断砂配置、储层物性、构造演化影响,形成了“构造控向、断砂控运、储层控藏、演化控调”的成藏演化模式,同中存异,高庙子地区古构造的控制作用更为明显,而中江地区岩性控制作用占主导。沙溪庙组气藏间歇性充注具“燕山期三幕成藏,喜山期调整改造”的成藏特征,多期构造演化和较强的储层非均质性影响了含气饱和度,导致沙溪庙组气藏分布、气藏产能差异大。  相似文献   

黄河口清水沟河道的冲淤过程与模拟          下载免费PDF全文

郑珊  吴保生  周云金  王开荣  韩沙沙 《水科学进展》2018,29(3):322-330

为揭示黄河口清水沟河道长时段的冲淤演变规律并建立其冲淤计算方法,分析了清水沟1976—2015年的时空冲淤演变过程,采用河床演变的滞后响应模型,考虑河口来水来沙及河道延伸与蚀退的影响,建立了清水沟累计冲淤量的计算方法。结果表明:1976—1980年改道初期清水沟改道点上游先冲后淤,改道点下游淤滩塑槽,淤积量随着下游河道展宽而增加,1980年后改道点上、下游河道冲淤过程趋于一致;受水沙条件等因素影响,1980—1986年清水沟主槽冲刷展宽,之后主槽淤积萎缩;1996年清八改汊和2002年小浪底水库"调水调沙"原型试验以来,河道转淤为冲,2002年后河道冲刷速率随时间指数衰减;河床演变的滞后响应模型可计算清水沟长时段的冲淤过程,该方法可为预测未来清水沟冲淤演变趋势提供科学参考。  相似文献   

干旱地区水循环过程中的地下水化学特征研究——以蒙古国前巴音钼矿水源地为例     

杨闪 《地下水》2018,(6):40-42

地下水的水化学类型在径流过程中会不断变化,并在径流与赋存的不同状态下体现出不同特征,体现出不同的地下水运移规律。本文以蒙古国前巴音钼矿水源地为例,选取水源地范围内的19个钻孔水样进行分析,取得了主要阴阳离子、TDS和水化学类型等数据。通过对地下水化学的空间分布特征、TDS值的变化和主要阴阳离子的演化规律进行研究发现:研究区水源地地下水补给来源为大气降水,沟谷东部地区的水循环强度高于西南部地区,外围地区最弱,地下水的水平径流较弱小于垂向;受水循环强度影响沟谷东部形成地矿化度的HCO_3型水,西南部形成HCO_3·Cl·SO_4、HCO_3·SO_4·Cl、HCO_3·SO_4型水,沟谷外围地区形成SO_4·HCO_3·Cl、Cl·SO_4·HCO_3、SO_4·HCO_3、Cl·SO_4型水,干旱地区水循环强度和补径排条件的差异会形成不同的水化学类。  相似文献   

Magnetotelluric evidence for asymmetric simple shear extension and lithospheric thinning in South China     

Shan Xu  Martyn J. Unsworth  Xiangyun Hu  Walter D. Mooney 《《地质学报》英文版》2018,92(Z1):92-93

  相似文献   

Two Phases of Mineralization in the Dabaoshan Polymetallic Deposit,Guangdong Province: Constraints from Re-Os Geochronology of Black Carbonaceous Mudstone and MolybdeniteEI北大核心CSCD     

Xiang J.  Liang X.  Shan Y.  Wang C.  Dong C.  Yu S.  Tan Z. 《大地构造与成矿学》2018,(4):732-745

The Dabaoshan polymetallic deposit is a polygenetic composite ore deposit located at south of the Qinhang (Qinzhou-Hangzhou) Metallogenic Belt, which is composed mainly of SEDEX type Cu-Pb-Zn and porphyry-skarn type W-Mo orebodies. Systematic field study shows that the W-Mo mineralization exhibits as quartz-vein type and skarn type orebodies around the granodioritic porphyry, or superimposes on the SEDEX type Cu-Pb-Zn orebody, while the Cu-Pb-Zn mineralization occurs mainly in the Qiziqiao Formation as stratiform-substratiform type and breccia type orebodies with typical SEDEX-type characteristics. Re-Os dating of five molybdenite separates from porphyry-skarn type W-Mo orebodies yielded isochron ages of 163.6±1.0 Ma (MSWD=0.58), which represents the age of W-Mo mineralization. Re-Os dating of seven black carbonaceous mudstone samples from a Cu-Pb-Zn orebody yielded isochron age of 387.6±9.9 Ma (MSWD=56), which is interpreted to be the age of SEDEX-type Cu-Pb-Zn mineralization. These ages indicate that there are at least two stages of ore mineralization in the Dabaoshan polymetallic deposit. The W-Mo mineralization is related to the Yanshanian intermediated-acidic intrusions, while the stratiform-substratiform SEDEX-type Cu-Pb-Zn mineralization is associated with the Hercynian seafloor hydrothermal activities. © 2018, Science Press. All right reserved.  相似文献   

地震叠前反演方法预测页岩脆性指数在南川地区的应用     

单中强 《江苏地质》2018,42(2):291-297

页岩气的有效开发依赖水平井的压裂效果,而页岩脆性是影响页岩压裂的关键因素。通过对比分析现有的3种脆性指数计算方法,即矿物脆性指数计算法、岩石力学脆性指数计算法、基于多元回归脆性指数计算法,优选基于多元回归的脆性指数计算法计算五峰—龙马溪组(简称龙马溪组)页岩储层脆性指数。以四川盆地东部南川地区龙马溪组海相页岩气为例,利用南川地区三维地震资料叠前反演方法,获取多元回归脆性指数计算方程所需的参数,预测页岩脆性指数。结果表明,在已有钻井矿物脆性指标约束下,叠前反演法计算的脆性指数平面预测效果较好,且与实际压裂数据具有较好的一致性,能够满足南川地区页岩气勘探开发的需要。  相似文献   

黔东松桃地区燕山期构造特征研究——以高地超大型锰矿床为例   总被引：2，自引：0，他引：2  

谢小峰  杨坤光  钱山  袁良军 《地质论评》2018,64(3):623-632

黔东松桃地区构造格局主要是受到燕山运动影响形成。燕山早期,区内处于SEE—NWW向区域挤压收缩,形成了NNE—SSW向褶皱和断裂。下寒武统杷榔组—变马冲组地层和南华系下统大塘坡组地层作为两套滑脱层,在构造变形过程中起到滑脱作用,滑脱层内褶皱变形强烈,以大量紧闭、顶厚不协调褶皱为主要构造样式,而其上、下岩层则以断块或宽缓褶皱变形为主,以软弱层为界面,其上、下岩层发生逆冲滑脱作用,形成了区内隔槽式褶皱的构造样式。燕山晚期,区内处于NNE—SSW挤压为主,形成了区内NWW向小型褶皱和断裂,同时燕山晚期构造横跨叠加在早期变形之上,导致早期NNE向褶皱枢纽呈波状起伏,轴迹弯曲,部分地区形成了构造穹窿和构造盆地,部分早期断层呈左行走滑性质。在燕山早、晚两期构造作用下,高地矿区含锰岩系作为软弱滑脱层,向猴子坳向斜的核部进行滑脱聚集,使其在向斜的核部富集,翼部相对减薄。同时,由于犁式正断层的存在,也影响了锰矿层的保存与破坏。  相似文献   

Iron isotopic analyses of geological reference materials on MC-ICP-MS with instrumental mass bias corrected by three independent methods     

Chuanwei Zhu  Wenning Lu  Yongsheng He  Shan Ke  Hongjie Wu  Linan Zhang 《中国地球化学学报》2018,37(5):691-700

Here we report iron (Fe) isotopic data of three pure Fe solution standards (IRMM-014, GSB Fe, and NIST 3126a) and five widely used geological reference materials (RMs) from the United States Geological Survey and Geological Survey of Japan obtained on a Neptune Plus multi-collector–inductively coupled plasma–mass spectrometer (MC-ICP-MS) in our laboratory over the past 3 years. The instrumental mass bias was corrected by three independent methods: sample-standard bracketing (SSB), Ni doping?+?SSB, and ⁵⁷Fe–⁵⁸Fe double spike?+?SSB. Measurements reveal that both the Ni doping and double spike methods helped calibrate short-term fluctuations in mass bias. Collectively, almost all measurements of RMs yielded δ⁵⁶Fe within?±?0.05 of recommended values, provided that each sample was measured four times on MC-ICP-MS. For the first time, new recommended values for NIST SRM3126a are reported (δ⁵⁶Fe?=?0.363?±?0.006, 2SE, 95% CI; and δ⁵⁷Fe?=?0.534?±?0.010, 2SE).  相似文献   

Performance of GPS and GPS/SINS navigation in the CE-5T1 skip re-entry mission     

Meng Wang  Tao Shan  Lin Ma  Ran Tao  Chunliang Chen 《GPS Solutions》2018,22(2):56

A CE-5T1 spacecraft completed a high-speed skip re-entry to the earth after a circumlunar flight on October 31, 2014. In addition to the strapdown inertial navigation system (SINS), a lightweight GPS receiver with rapid acquisition was developed as a navigation sensor in the re-entry capsule. The GPS receiver effectively solved the poor accuracy problem of long-term navigation using only the SINS. In contrast to ground users and low-earth-orbit spacecraft, numerous factors, including high altitude and kinetic characteristics in high-speed skip re-entry, are important for GPS positioning feasibility and were presented in accordance with the flight data. GPS solutions started at nearly 4900 km orbital altitude during the phases of re-entry process. These solutions were combined by an inertial measurement unit in a loosely coupled integrated navigation method and SINS navigation initialization. A simplified GPS/SINS navigation filter for limited resources was effectively developed and implemented on board for spacecraft application. Flight data estimation analyses, including trajectory, attitude, position distribution of GPS satellite, and navigation accuracy, were presented. The estimated accuracy of position was better than 42 m, and the accuracy of velocity was better than 0.1 m/s.  相似文献   

Tectono-magmatic evolution from accretion to collision in the southern margin of the Central Asian Orogenic BeltSCIEI北大核心CSCD     

李舢  王涛  肖文交  侯泉林 《岩石学报》2023,(5):1261-1275

造山带演化及增生到碰撞的转变是板块构造与大陆动力学研究中的前沿科学问题。中亚造山带被认为是古亚洲洋长期俯冲-增生演化形成的显生宙最大的增生造山带,以发育巨量的面状展布的俯冲-增生相关的弧岩浆岩为特征。并且,由于中亚增生型造山带在潘吉亚最后聚合过程中发生弧弧(陆)碰撞,因此缺乏大规模且跨构造单元的碰撞相关的构造和变质等物质标志。显然,能否识别出大洋闭合期间碰撞作用的岩浆标志成为确定增生造山带增生过程终止的关键之一。本文系统研究确定:中亚造山带东南缘二叠纪到三叠纪钙碱性-碱钙性岩浆在空间分布上显示出由北西向南东迁移演化的特征;在岩浆性质上具有从二叠纪新生地壳来源的弧岩浆向早-中三叠世碰撞挤压背景下古老陆壳组分逐渐增多的高Sr/Y岩浆以及晚三叠世后造山伸展相关的A型花岗岩演化的特征。这些特征提供了俯冲-增生向碰撞造山演变的关键岩浆岩证据。结合区域资料,厘定出增生造山带最后碰撞相关的标志性岩浆为沿缝合带呈零星线性展布的增厚下地壳源区的高Sr/Y花岗岩类,构建了中亚造山带南缘从双向俯冲-增生到增生楔-增生楔碰撞及后造山伸展的三阶段构造-岩浆演化模型。系统对比研究,揭示出增生-碰撞相关的岩浆记录沿横向展布在中亚造山带南缘甘肃北山到吉林中部一带,表明碰撞挤压相关的岩浆作用在中亚造山带南缘具有一定的普适性。中亚造山带南缘从增生到碰撞的岩浆演化记录的厘定,证实显生宙最大的巨型增生造山带演化末期经历了碰撞造山作用,对进一步深入探索增生造山演化末期碰撞相关的标志性岩浆具有重要意义。  相似文献